All Products >
New Arrivals
Best Sellers
Become a Partner
Contact
4K HDMI KVM Extender over IP, 120m/390ft USB Extender w/ Zero Latency & [email protected], up to 16 Sets with DIP Setting
SKU: 4KIP100-KVM$174.99
4K UHD & 120Hz High Refresh Rate:
Transmits [email protected] HDMI signal up to 120m/390ft over a single CAT5e/6/7 Ethernet cable; also supports [email protected] and 7.1-channel audio for wonderful game experience.
3-Port USB 2.0 Hub:
1x USB host port on the transmitter and 3x USB device port on the receiver. Remotely control your source device with keyboard, mouse and other USB 2.0 peripherals (high speed up to 480Mbps).
Multi-User Control of Remote PCs:
Deploy up to 16 sets in the same network for multi-user control. To route the signal from a transmitter (TX) to a receiver (RX), toggle each DIP Switch in RX to the same position of TX.
Excellent Compatibility:
Works with PC, PS, Xbox with keyboard, mouse and gamepad. Compatible with all operating systems, like Windows, Mac, Linux, etc. No driver required, just plug and play.
High Reliability:
Certificated by CE, FCC. Built-in superior surge/ESD protection. Comes with mounting ears for easy installation.
40 in stock
NEWEST 4K HDMI KVM EXTENDER OVER IP W/ ZERO LATENCY
Main Features:
- IP based, 1 Gigabit network support 4K video
- Supports video resolution up to [email protected]
- Supports HDCP 1.4
- Supports 7.1-channels audio
- Supports EDID limited copy
- Supports the distance up to 120m (395ft) with Cat 5e/6/6a/7 cable, with network switch, the distance will be extended unlimitedly
- Supports 3 USB 2.0 for full feature USB 2.0 applications
- Supports 4-Pin DIP switch for more sets works in a same network, up to 16 sets

4K UHD & Zero Latency
A pair of transmitter and receiver can be directly connected, extending [email protected] HDMI video over single Cat5e/6 cable up to 120m/390ft with zero latency. It transmits high-quality picture without any video loss and time delay.
Ideal for KVM Applications
You can remotely control PC, PS or Xbox with up to three USB 2.0 peripherals, such as keyboard, mouse, microphone, camera, etc. This KVM over IP extender can transmit high-speed USB 2.0 signal up to 120m/390ft via single CatX cable.


Multi-User Control of Remote Systems
Wonderful Gaming Experience with [email protected]
For e-sports games where every second counts, low refresh rate can cause picture lag, greatly affecting the player’s performance. The KVM extender supports [email protected] video input, ensuring your game sources can be effectively extended. With the KVM extender, you can have an unprecedentedly enjoyable gaming experience.


Excellent Audio Enjoyment
This KVM over IP extender supports audio formats such as PCM 2.0/2.1/5.1/7.1, Dolby Digital 5.1 ch, Dolby Digital Plus, Dolby True HD, DTS 5.1 ch, DTS-HD Master Audio, etc., so you can enjoy fantastic audio experience.
Transmitter
Technical | |
Input/Output | 1 x HDMI IN (19-pin female HDMI Type-A)
1 x USB HOST (female USB Type-B) 1 x 4-Pin DIP Switch 1 x DC 12V connector with locking 1 x LAN (RJ45) |
Input Signal Type | HDMI 1.4b |
Input Resolution Supported | 640×4808, 800×6008,10, 1024×7688,10,
1280×7206,7,8,9,10, 1280×7688,10, 1280×8008,10, 1280×9608,10, 1280×10248,10, 1360×7688, 1366×7688, 1440×9008,10, 1600×9008, 1600×12008, 1680×10508,10, 1920×10801,2,3,4,5,6,7,8,9,10, 1920×12008, 3840x2160P2,3,5, 4096x2160P2,3,5
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 100 Hz, 10 = at 120 Hz |
Input Audio Format Supported | PCM 2.0 / 2.1 / 5.1 / 7.1, Dolby Digital 5.1 ch, Dolby Digital Plus, Dolby TrueHD, DTS 5.1 ch, DTS-HD High Resolution Audio, DTS-HD Master Audio |
Maximum Data Rate | 9 Gbps |
Maximum Pixel Clock | 300 MHz |
Output Signal Type | Compressed IP streams |
Transmission Distance | Cat 5e or above: 120m/395ft
HDMI: 15m/49ft |
General | |
Operating Temperature | 0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing |
Storage Temperature | -20 to +70°C (-4 to +158 °F), 10% to 90%, non-condensing |
ESD Protection | Human Body Model:
±8kV (air-gap discharge)/ ±4kV (contact discharge) |
Power Supply | DC 12V 1A |
Power Consumption | <2.5 W |
Unit Dimensions
(W x H x D) |
112mm × 17.8mm × 65.2mm / 4.41’’ × 0.70’’ × 2.57’’ |
Unit Weight
(without accessories) |
0.18kg/0.40lb |
Receiver
Technical | |
Input/Output | 1 x LAN (RJ45)
1 x HDMI OUT (19-pin female HDMI Type-A) 3 x USB DEVICE (female USB Type-A) 1 x 4-Pin DIP Switch 1 x DC 12V connector with locking |
Input/Output Signal Type | Compressed IP streams |
Output Resolution Supported | 640×4808, 800×6008,10, 1024×7688,10,
1280×7206,7,8,9,10, 1280×7688,10, 1280×8008,10, 1280×9608,10, 1280×10248,10, 1360×7688, 1366×7688, 1440×9008,10, 1600×9008, 1600×12008, 1680×10508,10, 1920×10801,2,3,4,5,6,7,8,9,10, 1920×12008, 3840x2160P2,3,5, 4096x2160P2,3,5
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 100 Hz, 10 = at 120 Hz |
Output Audio Format Supported | PCM 2.0 / 2.1 / 5.1 / 7.1, Dolby Digital 5.1 ch, Dolby Digital Plus, Dolby TrueHD, DTS 5.1 ch, DTS-HD High Resolution Audio, DTS-HD Master Audio |
Maximum Data Rate | 9 Gbps |
Maximum Pixel Clock | 300 MHz |
Transmission Distance | Cat 5e or above:120m/395ft
HDMI: 15m/49ft |
USB Consumption | Recommended no more than 0.5A per USB port |
General | |
Operating Temperature | 0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing |
Storage Temperature | -20 to +70°C (-4 to +158 °F), 10% to 90%, non-condensing |
ESD Protection | Human Body Model:
±8kV (air-gap discharge)/ ±4kV (contact discharge) |
Power Supply | DC 12V 1A |
Power Consumption | < 4W (without USB Consumption) |
Unit Dimensions
(W x H x D) |
112mm × 17.8mm × 65.2mm / 4.41’’ × 0.70’’ × 2.57’’ |
Unit Weight
(without accessories) |
0.18kg/0.40lb |
In the Box
- 4KIP100-KVM x1
- Power Supply (DC 12 V 1A) with US Plugs x2
- USB 2.0 Type-B to Type-A Cable (L=1.5m) x 1
- Mounting Brackets (with Mounting Screws) x4
- User Manual x1
Troubleshooting FAQ
- Check if you have toggled each individual switches of the DIP Switch in receiver to the same positions as these in transmitter. After that, please re-power TX and RX for DIP switch changes to take effect.
- Try connecting the transmitter to the receiver directly, without using the Ethernet switch. Then check if the problem is solved.
- If direct connection works, then try connecting the transmitter and the receiver to a Gigabit Ethernet switch. Check if it still works. If it doesn’t work, it proves that the processing capacity of the Ethernet switch cannot reach Gigabit. In this situation, please use a new Gigabit Ethernet switch.
- Check if you have toggled each individual switches of the DIP Switch in receiver to the same positions as these in transmitter. After that, please re-power TX and RX for DIP switch changes to take effect.
- Check if the “Power” LED indicators on the transmitter and the receiver are solid on.
- Check if the “Link” LED indicators on the transmitter and the receiver are solid on. If not, try using a new Cat cable.
- Set the source resolution to [email protected] or 1080P to check if it helps.
- Try connecting the source to the display device directly, without using the KVM extender. Then check if there is any video output.
- When the KVM extender works with your Ethernet switch, Gigabit bandwidth is required for the end-to-end data transmission.
- It is recommended to separate the KVM extender’s local area network from your home network, otherwise they will affect each other, causing the network speed to slow down or causing the source video to flicker.
- Check if you have connected the transmitter to your PC via a USB cable.
- Try connecting the USB cable to another USB port on your PC.
- Try plugging in your USB devices if they have an independent power supply. Check if the USB devices are compliant with USB 2.0 specification.
- Try connecting the USB devices to the PC directly without using the KVM extender. Then check if the USB connection works.
You May Also Like
MODEL: 4KEX100-KVM
MODEL: 4KEX100-DP-KVM
MODEL: HDEX80-KVM
MODEL: U3SW24
Comparison Chart of Related Products
![]() | ![]() | ![]() | ![]() | ![]() |
|
U2EX50 | HDEX80-KVM | 4KEX100-KVM | 4KIP100-KVM | 4KEX100-DP-KVM | |
Supported Max Video Resolution | No | [email protected] | [email protected] (4:2:0 8bit), [email protected] 4:4:4 | [email protected], [email protected] | [email protected] |
Transmission Range | 197ft (60m) | 260ft (80m) | 330ft (100m) | 395ft (120m) | 330ft (100m) |
USB Extension | Yes (4 Ports USB 2.0) | Yes (2 Ports USB 2.0) | Yes (4 Ports USB 2.0) | Yes (3 Ports USB 2.0) | Yes (2 Ports USB 2.0) |
POE/POH/POC | No | Bi-Direction | Uni-Direction(TX to RX) | No | Uni-Direction(TX to RX) |
RS232 | No | No | Yes | No | Yes |
Video Transmission Port | No | HDMI | HDMI | HDMI | DisplayPort |
Router/Ethernet Switch Compatibility | No | No, point to point | No, point to point | Yes, up to 16 sets of TX and RX | No, point to point |
Plug & Play | Yes | Yes | Yes | Yes | Yes |
One-Stop AV Product and Solution provider
Strong R&D team and own manufacturing base. Able to provide full services of bulk orders and OEM/ODM Business.
Fully Certified Company
CE, FCC, ROSH, ISO9001, National Hi-tech Enterprise, Double Soft Certification Enterprise. Quality assured.
Sound Quality Management System
We believe quality control starts at the beginning. We paid highly attention on product design, R&D testing and trial production before any bulk productions.
Darwin –
Good stuff
Customer service is great! Product is awesome! Waiting for delivery to Singapore took only a week. Package was well packed.
Honestly, I am very impressed with the whole buying process. Really good.
Product is capable of connecting 3 USB devices which I used it for the following:
1) Webcam
2) wireless keyboard and mouse
3) USB soundcard
Guess what, now I can link up my stage area devices to my AV room pc and control it from the stage. Love it.